Features: 1. Mini size and portable pen design, easy to put it in your pocket or bag to carry. 2. Simple button for simple use, reduce the risk of pushing the wrong button and missing the important information. 3. 1080P HD camera helps to catch clear pictures and videos. 4. Maximum support 64GB TF card, large capacity for storing more and richer content. 5. Connect to computer with the Micro USB data cable, which is common in the market, to read and modify the files inside the machine, no driver needed. 6. Compatible for Windows, for Linux and for OS operating systems. Specification: Video Format: AVI Video Resolution: 1920x1080P Video Frame Rate: 30FPS Player Software: Operating System Comes with Player Software Image Format: JPG Image Pixels: 2560x1440 Battery Capacity: 200mAh Working Hours: About 70 Minutes Charging Voltage: DC-5V Interface Type: Micro 5 PinUSB Storage Type: External TF Card Battery Type: High Capacity Polymer Lithium Battery Maximum Memory Support: 64GB Package List: 1 x Pen Head 1 x Pen Holder 1 x Manual 1 x USB Cable 1 x Cloth 1 x Pin Direction for Use: 1. Power on/automatic shutdown Long press the power button at the top of the pen for about 2 seconds, and the red light will turn on and enter the standby state. No operation for 60 seconds in standby mode, and the machine will shut down automatically. When the TF memory card was not detected, the machine was shut down after flashing red light for 5 times. 2. Video In standby state, long press the power button for 2 seconds, the red light flashes for 3 times and then goes out to start recording. In the recording state, press the button, the red light will go on and save the file, and then return to standby state. Press the power button again for 2 seconds, the red light flashes three times, and continue recording. The video resolution is 1920x1080, and a video is saved in 10 minutes. 3. Photo In standby mode, press the power button and the red light flashes once to indicate that a photo has been taken and saved with a resolution of 2560x1440 4. Recording In standby mode, press the power button for 3 times continuously, and then the red light flashes once to start recording. 30 minutes for each recorder. 5. Record while charging Connect charger and red light flashing slowly, press the power button for 2 seconds and red light flashing 3 times to start recording. 6. Turn off Hold the power key for 3 seconds until the red light goes out and the machine is turned off. 7. Charging Connect the USB port of the computer or charge with 5V power supply. When charging, the red light will flash slowly. When the battery is full, the red light will be normally on. 8. Time setting The machine provides the function of showing the recording time in the video file. After the first recording, connect the machine to the computer and open the time file inside. Change the time data inside without changing the format and save it. The next time we shoot will be the correct time.