1、Full Metal Gear: The encoder's gears are high temperature resistant, wear resistant and have a strong load bearing capacity, effectively protecting the main body of the gear box motor. 2、Stainless Steel Housing: The encoder's housing is made of stainless steel, which is wear resistant, rust free and durable. 3、Stable Performance: This encoder is an excellent electronic product component with stable performance and good load-bearing capacity. 4、Small and Lightweight: The rotating incremental encoders are small, lightweight, compact, easy to install and easy to use. 5、Widely Used: The encoders are suitable for intelligent control of various drainage measurements, automatic fixed length leather automatic cutters, etc. Item Type: Rotating Incremental Encoder Material: Stainless steel, ABS Operating Voltage: DC5-24V Output Mode: Push pull output F (PNP) Encoder Outer Diameter: Approx. 50mm / 1.97in Radial Load: ≤30N Axial Load: ≤20N Starting Torsion: ≤2 x 10 negative cubic N.m Maximum Speed: 6000r/minute Rotational Inertia: 20g/cm² Allowable Angular Acceleration: 2 x 10 quadratic rad/S Shock Resistance: 1000m/S².6ms Vibration Resistance: 1000m/S².10-200Hz Operating Temperature: -10℃-70℃ Storage Temperature: -20℃-80℃ Relative Temperature: <RH85% No frost Protection Grade: IP50 1 x Rotating Incremental Encoder 3 x Screw Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store