New design Arrow LED Sequential Flashing Lights Amber(Turn signal light) White(DRL) Switchback. Light Strip increase your safety and add the stylish look of high performance seen on todays high performance vehicles. Lets you switch from using your standard headlights to a LED light source during the daytime. Specification: Each strip consists by 9pcs of dual-color 2835 SMD LEDs modules(81LEDs). Easy to install with doublesided adhesive base. Lumen: 1200LM Input Voltage: 12V Lamp Dimension: L x W x H =12.48In * 0.94In * 0.59In. Feature: Function:Each strip consists by 9pcs of dual-color 2835 SMD LEDs modules(81LEDs).high light transmittance body, uniform light. Used as daytime running light DRLs, it is white; used as turn signal light, it is yellow/amber and flow like water. Connection: Blak wire for battery positive(-);White wire: connect the battery positive(+);Red wire for ACC, Yellow wire for turn signal line.Voltage: 9-24V.Size: L x W x H =12.48In * 0.94In * 0.59In. Easy Install: Double-sided tape,tear-off protection sticker directly attached to the desired place. (Note:Position of the sticker is kept clean and dry). With screws, you can fix the screw position on both ends of the lamp body to the vehicle. Warm Reminder: Do a normal function test before installation to prevent troubles. Specific steps are as follows: white + red line connected to power + , black line connected to power- (white light, daytime running light); white + yellow line connected to power + pole, black line connected power - (yellow light flash like water, signal steering light);