Item Type: 3D Printer Build SheetProduct Size: Approx. 300 x 300 x 4mm / 11.81 x 11.81 x 0.16in Product Use: 3D printerProduct Material: Special Tempered Glass, Microporous CoatingApplicable to: For Anet E12 E16 for A8PLUS ET5 series, for Artillery SW X1 and other models.Temperature Settings for Different Consumables:1. PLA: 50 to 702. TPU: 50 to 703. ABS: 100 to 125 (110 recommended)4. PC: 100 to 130 (120 is recommended)5. Nylon: 90 to 120 (110 is recommended)6. PP: 100 to 130 (120 is recommended)7. PETG: 50 to 70 .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; } 1Good Adhesion Effect: This pad is covered with microporous coating, which is very adhesive after heating. The adhesion is strong when printing, without the help of masking paper and solid glue. 2Good Stability: The special coating of this pad is an inorganic coating with a hardness of 8 Mohs and a heat resistance of 400 . It can be used repeatedly without damaging the performance. 3Easy to Clean: This pad has a thin layer of protection, which is easy to clean with water or alcohol without leaving traces. You can use the pad at will! 4Easy Model Removal: After the pad cools down, the model can be taken down easily by hand without tools such as a blade. Take it with confidence! 5Wide Compatibility: This pad can work with multiple materials, including PLA, TPU, ABS, PC, PP, etc. And there are recommended setting temperatures for them!