Features: 1.Uses the world's most advanced fingerprint algorithm to ensure the high accuracy and optimal speed of fingerprint recognition which makes the recognition time is less than 1 second. 2.TCP/IP communication, simple and practical network connection, push technology supporting, access control network and data collection work can be shared freely. 3.The infrared optical fingerprint collector can prevent strong light, dry fingerprints, shallow fingerprints, and can work offline. And it supports Wiegand26 signal and can be used with any controller on the market. 4.Supports self?service download of EXCEL attendance reports by USB flash drive, supports unlocking, exit switch andf multiple verification methods, also supports anti?tampering, anti?reverse. 5.There are three verification methods: fingerprint, password, ID card. And it has T9 touch buttons, 2.4?inch display, simple and clear screen. Specification: Item Type: Access Control Attendance Machine_x000D_ Material: ABS Plastic_x000D_ Fingerprint Capacity: 1000_x000D_ Card Capacity: 1000_x000D_ Password Capacity: 1000_x000D_ Record: 160000_x000D_ Communication Method: TCP/IP, USB_x000D_ Lcd Monitor: 2.4 inches_x000D_ Language: English_x000D_ Sensor: Light Sensor_x000D_ Button: T9 Touch Button_x000D_ Power Supply: 12V 2A_x000D_ Working Temperature: 0-45_x000D_ Working Humidity: 20-80_x000D_ Identity Verification: Fingerprint/Password/ID Card_x000D_ Usb Disk: Support_x000D_ Card: 125khz ID Card_x000D_ Anti-Reverse: Support_x000D_ Wiegand Signal Output: Wiegand26 Output_x000D_ Product Size: Approx. 194 x 79 x 34mm/7.6 x 3.1 x 1.3in_x000D_ _x000D_ _x000D_ Suggested Using Steps:_x000D_ Step 1: Install the device and power on the device. _x000D_ Step 2: User registration, fingerprint ID registration, password and privileges set. _x000D_ Step 3: Verify user identity and confirm whether the registered fingerprint, ID and password are available. _x000D_ Step 4: Insert the USB flash disk, enter the "shift setting" of the main menu, download the shift, then pull out the USB flash disk and insert it into the computer, open the attendance setting table, and set the shift and personnel. _x000D_ Step 5: Insert the USB flash disk into the attendance machine, enter the "shift setting" of the main menu, and upload the attendance setting table. _x000D_ Step 6: Check whether the equipment time is accurate. After the confirmation is completed, you can start attendance. _x000D_ Step 7: At the end of the month, enter the main menu "download report" of the attendance machine, and download the standard report through the USB flash disk, and then go to the computer statistics._x000D_ _x000D_ _x000D_ The User Interface of the Device is Shown in the Figure: _x000D_ Attendance Status: Close to the front of the device, display the scanning status on the screen, and the information will be displayed after fingerprint recognition, ID recognition, employee identification or password._x000D_ Date and Time: Display the current device time. The date and time can be calibrated in the elapsed time in the advanced settings menu. Press the menu button in the user interface, fingerprint recognition, ID card recognition or password recognition administrator enters the main menu interface. PackageList: 1 x Access Control Attendance Machine 1 x USB Data Cable 1 x Hanging Board 1 x CD 2 x ID Card 3 x Connecting Cable 1 x Network Cable 1 x Installation Screw Package 1 x Instruction Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.