Feature: 1. Incubation Temperature Control: The automatic incubator controller allows for precise temperature control during the incubation process, ensuring optimal conditions for successful hatching. 2. Easy to Use: With its user-friendly design and intuitive interface, this incubation temperature controller makes it easy to set and monitor the temperature, suitable for both beginners and experienced breeders. 3. Temperature Range: The incubator temperature controller maintains a stable temperature range of 0–99°C, creating a reliable and consistent environment for egg development and hatching. 4. With Egg Lamp: The included egg lamp provides essential lighting for monitoring eggs without disturbing them, allowing you to observe progress without compromising development. 5. Temperature Calibration: The temperature control function can be calibrated to ensure accurate readings, enabling fine-tuning of temperature settings for optimal incubation conditions. Specification: Item Type: Incubation Temperature Controller Size: Approx. 12.2 x 6.5 cm / 4.8 x 2.6 in Temperature Display Range: 0–99°C Temperature Resolution: 0.1°C Output: 1 Heating, 1 Egg Lamp Relative Humidity: Less than 85% Ambient Temperature: -20–70°C Weight: Approx. 193 g / 6.8 oz Material: ABS In normal working state, press the setting key (short press) to enter reference temperature parameter setting. Reference Temperature Setting Parameter: 0.0–99.9°C Factory Default Value: 37.8°C In normal working state, press and hold the Set and Increase keys simultaneously for more than 3 seconds (long press) to enter temperature calibration mode. Temperature Calibration Settings: Can be adjusted according to an external thermometer. In normal working state, press and hold the Increase and Decrease keys for more than 3 seconds (long press) to restore factory settings. Control Function: 1. Heating Function: When the measured temperature TH1 is less than the set point PP, heating starts; when TH1 exceeds PP, heating stops. 2. Egg Lighting Function: In normal operation, press the egg lamp key to turn on the light; press again to turn it off. 3. Calibration Function: The temperature sensor may drift over time and can be calibrated using an accurate thermometer. Press and hold the Set and Increase keys simultaneously until the display blinks, showing the sensor temperature. Use the Increase and Decrease keys to adjust the reading to match the reference thermometer. 4. Sensor Error Indication: If the temperature sensor fails or is disconnected, the display shows "EE" and heating stops automatically. Package List: 1 x Incubation Temperature Controller 1 x Power Cord 1 x Crocodile Clip Wire