Condition: 100% Brand new Item Type: Remote Control Frequency: 270MHz~434MHz Chips could be copied: 2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101, HCS200\HCS201(part code),HCS300\HCS301(part code), part single chip microcomputer Code Cleaning Method: Press the unlock button and lock button at the same time(some shells are the up button and down button), after the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press Copy Method: One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with 0 distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code. 1、Can copy more chips, easy to operate 2、The product can copy common garage doors, retractable doors, gates, parking locks 3、Four buttons can be used to copy four different types of chips, one remote control can operate four different types of facilities. 4、The frequency ranges from 270MHz to 434MHZ and more than ten frequency points 5、The copying data is faster, it is not easy to lose code, and the distance is far 1 x Remote Control