OPCOM FOR OPEL1.70 Scanners Cable adapters USB diagnostic wire tester instrument<br> New OPCOM V1.70 Firmware 2014V Software Function:<br> 1. It covers almost all for Opel cars, even new cars with CAN-BUS based diagnostic, such as for Vectra-C,for Astra-H,for Zafira-B.<br> 2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.<br> 3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.<br> 4. Since for Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.<br> PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)<br> 5. Fault codes will be shown with all available information:<br> Full Fault Code Text <br> 1) Full status information (Present, Not present, Intermittent)<br> 2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.<br> 3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.<br>