Item Type: Manual Displacement Platform_x000D_Material: Aluminum alloy_x000D_Table Diameter: Approx. 60mm / 2.4in_x000D_Movement Mode: RS rotation R axes_x000D_Stroke: 360 Degree coarse adjustment_x000D_Fine Adjustment: 5_x000D_Load: 29.4N (3kgf)_x000D_Minimum Scale: 2 Degrees_x000D_Concentricity: 0.03mm_x000D_Table Type: Manual sliding table_x000D_Installation Method: _x000D_1. Use the countersunk holes on the base to install the platform. _x000D_2. Rotate the work surface to make the screw through holes and the countersunk head on the base concentric. _x000D_3.Then you can fix it with screws and repeat the left side, then the platform can use 4 countersunk holes fixed. 1Using cross-roller guide rails, possess high accuracy and stable movement. Can be fixed to the applicable position with customers' accurate machinery or instruments 2Light weight, the main material is aluminum alloy, suitable for other built-in equipment 3The micrometer drive mode is ultra-accuracy, the rotating platform can accurately adjust the angle of the platform to the approximate position, and the thickness adjustment switch screw can fine-tune with the micrometer 4The sliding table can be applied to various production machinery with high accuracy or medium load, inspection device, accurate positioning and quantitative movement 5There are various types of sliding tables that can be matched with each other, such as single axes, dual axes, z axes, c axes, r axes, etc. 6Diversified feed methods such as coarse and fine movement handle/centimeter probe, feed screw, rack and pinion, with scale to manage the movement value1 x Manual Displacement Platform