Features: 1. EFFECTIVE ADHESIVE AGENT – Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil. 2. HIGH-TEMPERATURE RESISTANT – can withstand temperatures up to 150degC. When fully cured, it is as hard as iron and provides uniform bond line thickness. 3. SUPERB BOND STRENGTH – It forms a strong and stable permanent bond that should last for ages. It can be shaped, tapped, filed, sanded and drilled depending on its purpose. 4. EASY AND FAST DRYING APPLICATION – The preparation and application are simple and easy. Just mixes, apply, and let it dry for a few hours. The full cure time is up to 24 hours. 5. WIDE USE – Mainly used for iron and steel casting, sand holes and pores, and filling of casting defects such as cracks. It can be used to repair fuel tanks, plumbing, concrete breaks, and a whole lot more. Notice: 1. Actual color may be slightly different from the image due to different monitor and light effect. Please allow minor deviation due to manual measurement. Specification: Type: Metal Repair Paste Content: 60g/100g Base material: resin sealant Curing time: 20 minutes Density: 300 Hardness: 200 Shear strength (MPa): 20 Tensile strength (Mpa): 20 Curing method: air humidity Elongation at break (%): 30 Extrusion rate: 98% Surface drying time (min): 5 Function: Adhesive seal Application: metal, iron, steel bonding Include: 1 x Metal Repair Paste