Item Type: Condenser Microphone Material: Aluminium Alloy Color: Black Connection Method: USB Function: Recording Pole Diagram: Unidirectional Type: Wired Sound Head: Capacitive Frequency Response: 30Hz-20KHz Directivity: Cardioid (0°~180° at 1KHz>12db) Maximum Sound Pressure Level: 120dB S.P.L Signal to Noise Ratio: 70dB Sensitivity: 25mV/Pa (-32dB±2dB) Speech Amplifier Function: +1dB±25dB gain adjustable Audio Output Line: φ5mm / 0.2in x 3 m / 9.8ft USB Data Cable: φ3.5mm plug Power Supply Mode: USB DC5V power supply Minimum System Configuration Requirements: CPU: for Intel P4 1.6GHz Memory: 512M Hard Disk: 500M Graphics: Onboard graphics Sound Card: Onboard sound card, microphone input, monitoring function USB Interface: Free USB interface Network Bandwidth: 512K Monitoring Equipment: Monitor headphones How to Use: Connect as shown in the instruction manual to use. 1、Plug and play. Condenser microphone with USB data interface, compatible with laptop or PC. No driver installation and complicated debugging are required. 2、The recording microphone with an additional volume knob has a larger output. Built?in reverberation chip, adjust the reverberation knob to increase the perfect reverberation effect. 3、Pickup pattern. It ensures high sensitivity, reduces unwanted sounds from the side and rear, improves the isolation of the required sound source, and makes the sound quality clearer and purer. 4、The USB condenser microphone adopts a strong metal structure design and a stable tripod bracket, which is easy to adjust and fix the angle position of the USB microphone. 5、Condenser microphone. The condenser microphone has low noise, accurate sound pickup, firmness and reliability, stable performance and good directivity. 6、The tripod has the most stable and stable support. The rotating shaft bracket sleeve ring is easy to install and can easily adjust various angles. 1 x Condenser Microphone 1 x Tripod 1 x Clip 1 x USB Cable 1 x Anti-Wind Foam Cap 1 x Instruction Manual