LCD Screen and Digitizer Full Assembly With Frame for Xiaomi Redmi 9A Redmi 9C Redmi 9C NFC Redmi 9AT Redmi 9i Redmi 9 Activ Poco C31 Redmi 10A About the product 1. Replacement LCD screen + touch screen digitizer assembly with frame for Xiaomi Redmi 9A Redmi 9C Redmi 9C NFC Redmi 9AT Redmi 9i Redmi 9 Activ Poco C31 Redmi 10A 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation Notes Tips 1: Test before installation. When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself with an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing. Screen replacement is a very fragile product. We strongly suggest testing before installation. Please simulate testing, which means taking the phone apart (motherboard + LCD or screen), connecting audio cable and new replacement, powering on, and testing. If test is OK, please install it. If it cannot show, please contact us immediately. Do not force it to be installed in the phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable. Please make sure LCD cable does not over-bend. Bending over 90 degrees will cause black display.