MeanWell LPV-60-24 24V DC 2.5A 60W IP67 power supply Description: The Mean Well switched-mode power supply with a nominal voltage of 24V DC in a plastic, hermetic IP67 housing meets the strictest standards and criteria, thanks to which it can be used to work in industrial automation systems, to control machines, power lighting and a wide range of devices. Small dimensions allow for installation in hard-to-reach places and where it is necessary to minimize the space occupied. The power supply can be mounted on a DIN rail using special holders. The power supply is cooled by free air flow , thanks to which it is highly trouble-free - a very important feature when the power supply works continuously. The operating temperature for this model is -25 to 65C. In addition, the power supply has overload protection 110-150% of nominal power. Main features: Universal AC input voltage range A product of the renowned manufacturer Mean Well Free air flow cooling Wide operating temperature range Protections: Short-circuit / Overload / Overvoltage / Thermal Tested under full load Hermetic housing - compatible with IP67 High efficiency, reliability and long service life Designed to work in dry and wet conditions Application in LED lighting and light boards Technical Specifications: Output parameters: Output voltage: 24V DC Output Current: 2.5A Output current range: 0 – 2.5A Power: 60W Interference and noise: 150mV pp Output voltage tolerance: 5% Stabilization from network changes: 1% Stabilization from load changes: 2% Settling/Rise/Hold time: 500ms/20ms/50ms Input Parameters: Input voltage range: 90-264VAC or 127-370VDC Frequency range: 47 - 63Hz Efficiency: 86% Input current: 1A (at 230V AC) Max current surge: 60A (at 230V AC) Leakage current: < 0.25mA (at 240V AC) Security: Against overload: 110% - 150% of maximum output power. (Protection type: cut off the output voltage; the voltage returns after the overload is removed. ) Overvoltage: 27.6 - 32.4V Temperature: cut off the output voltage; the voltage returns after the temperature drops. Environment: Working temperature: -25 to 70C Operating humidity: 20 - 90% (non-condensing) Storage temperature and humidity: -40 to 80C, 10 – 95 RH Efficiency as a function of temperature: 0.03% / C (0 - 50oC) at the output Vibration: 10 - 500Hz, 2G 10min/1 cycle, 60min along each X,Y,Z axis Security: Standards: UL879(except for LPV-60-5), UL1310(except for LPV-60-5), CSA C22.2 No. 207-M89(except for LPV-60-5, LPV-60-48), CAN/CSA C22.2 No. 223-M91(except for LPV-60-5,LPV-60-48), BIS IS15885(for LPV-60-12,LPV-60-24 only), EAC TP TC 004, IP67, IEC60950-1:2005 A2:2013 approved ; design refer to TUV EN60950-1 Insulation test voltage: I/PO/P: 3kV AC Insulation resistance: I/PO/P:>100MΩ / 500VDC / 25 / 70% RH Radiated and Conducted EMI: Complies with EN55032 (CISPR32) Class B, EN61000-3-2 Class A(80% load), EN61000-3-3, EAC TP TC 020 EMS resistance: Complies with EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A, EAC TP TC 020 Other: MTBF: 732,000 hours according to MIL-HDBK-217F (25oC) Dimensions: 162.5 x 42.5 x 32mm (length x width x height) Weight: 0.42kg 1. All parameters, unless otherwise stated, are based on 230V AC power, nominal load, 25C, 70% RH humidity. 2. Interference and noise measured in the 20MHz band using a probe (12 pairs of twisted wires) terminated with 0.1uF and 47uF capacitors. 3. If the power supply is considered as a device that will be installed inside the final product, the product should be retested (including the built-in power supply) for compliance with the EMC directives.