Optical Fiber Fusion Splicer FS‑60A Welding Splicing Machine with High Accuracy AC100‑240VUK Plug Item Type: Optical Fiber Fusion Splicer1 Overview: This model of high-precision optical fiber fusion splicer adopts high-speed image processing technology and special precision positioning technology, which can automatically complete the entire process of optical fiber fusion in 9 seconds. It is light in weight, easy to carry, simple to operate, fast in splicing speed, and low in splicing loss. It is especially suitable for optical fiber and cable engineering, maintenance, scientific research, and teaching in telecommunications, radio and television, railway, petrochemical, electric power, military, public security and other communication fields. This machine is mainly used for the connection of optical fibers, and can be connected to ordinary sheathed optical cables, jumpers, and single-mode, multi-mode, and dispersion-shifted quartz fibers with a cladding diameter of 80μm-150μm. Care should be taken to keep it clean during use and avoid strong vibrations and shocks. 2. Product technical indicators: Applicable Fiber: SM (G.652&G.657), MM (G.651), DS (G.653), NZDS (G.655) and custom fiber types Splice Loss: 0.02dB (SM), 0.01dB (MM) 0.04dB (DS/NZDS) Return Loss: Better than 60dB Typical Connection Time: 9 seconds Typical Heating Time: 26 seconds (heating time can be set, heating temperature can be adjusted) Fiber Alignment: Fine alignment, core alignment, and cladding alignment Fiber Diameter: Cladding diameter 80~150μm, coating diameter 100~1000μm Cutting Length: Coating layer less than 250μm: 8~16mm; coating layer 250~1000μm: 16mml Optical Fiber Clamp: Multi-function clamp, suitable for bare fiber, pigtail, jumper, sheath; the replacement clamp can be used for SC and other connectors for various FTTx fiber optic cables. Magnification: 400 times (X-axis or Y-axis) Heat Shrink Tubing: 60mm, 40mm and a series of miniature tubing Display: 5.0 inch TFT color LCD display. The content can be flipped to facilitate two-way operation. External Interface: USB interface, convenient for data download and software update Welding Mode: 17 groups of use modes Heating Mode: 9 groups of use modes Splice Loss Storage: 5000 latest splice results are stored in the built-in memory The Built-in Battery: Can be continuously welded and heated for no less than 200 times Power Supply: Built-in lithium battery 11.8V power supply, 5800mAh, charging time ≤ 3.5 hours; input AC100-240V50/60HZ, output DC13.5V/4.81A Power Saving Function: 15% lithium battery power can be saved under typical environment Working Environment Temperature: -10~+50℃, temperature: <95%RH (non-condensing), Working Altitude: 0~5000m, maximum wind speed: 15m/s Body Size: 158mm (length) x 130mm (width) x 156mm (height) / 6.2 x 5.1 x 6.1in Illumination Lamp: For easy placement of optical fiber at night Body Weight: Approx. 1770g / 62.4oz (without battery) 2140g / 75.5 (with battery) How e: When the fusion splicer encounters the following situations, please turn off the fusion splicer immediately and remove the adapter from the power input port of the fusion splicer, otherwise it may cause serious consequences such as the fusion splicer cannot work normally or cannot be repaired. 1. Liquid and foreign matter enter the inside of the fusion splicer; 2. The fusion splicer is subject to strong vibration and shock. 3. It is forbidden to repair wrongly after disassembling the fusion splicer;