PDB: Input voltage range: 6~60V (2~12S LiPo) PDB/current sense resistor: 140A cont, 264A burst. ESC power pads: 60A cont. 100A burst 6x ESC power /signal/ telemetry pads Current Senor: 264A, 3.3V ADC<br><br>Current Scale 125(INAV/BF), BATT_AMP_PERVLT 80 (ArduPilot) JST-SH-8P Connector and Pads Vbat: Battery voltage G: ground Curr: current signal Tlm: Duplicates Tlm pads for ESC telemetry S1/S2/S3/S4/S5/S6: ESC signal Vx: Regulator output BEC Vx output (5V default) Vx= 5V by default, Continuous 5 Amps Bridge 9V jumper, Vx= 9V, Continuous 4 Amps, Max.5A Bridge 12V jumper, Vx= 12V, Continuous 4 Amps, Max.5A Output Short-circuit tolerant (1 seconds) Overcurrent protection & self-recovery Voltage divider 1K:20K resistors Output 1/21 Vbat voltage Due to different product batches, the appearance may vary, which does not affect the use Colour:Blue Material:Composite Materials Size: 30.5x30.5mm 20x20mm<br><br>Package Contents: 1x PDB-HEX 1x Rubycon ZLJ 63V 390uF 1x JST-SH1.0_8pin cable 2x JST-SH1.0_8pin connectors<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.