1、Multi Function: This module expands an RS232 port of the PLC to an Ethernet communication port and a touch screen communication port, realizes PLC networking and communication with touch screen while restoring PLC communication function. 2、Two Client Connectable: Support two client connections at most, one TCP and one UDP, the device can be parameterized and run through the WEB server. 3、Fast Transmission Rate: Support communication at a maximum baud rate of 115200, which can meet the needs of large data communication, support Ethernet communication of CX Programmer. 4、Simple Power Supply: The module does not need an external power supply, and can be directly powered from the RS232 programming communication port of the PLC. 5、High Safety: The power circuit adopts anti reverse connection design, which is safe and reliable, the module can be widely used in the signal acquisition and control of industrial field equipment. Item Type: PLC to Ethernet Conversion Module Material: ABS Indicator Lights: PWR, SYS, ETH, PLC, HMI five indicators Connection with CX Programmer: Ethernet Communication Protocol: FINS TCP, FINS UDP Support PLC Models: CP1E, CP1L, CP1H with 232 serial ports Ethernet Interface: IEEE802.3 compatible, LINK ACTIVE indicator, line sequence adaptive Interface Type: RJ45 female socket Transmission Rate: 10/100Mbps Protocol Support: FINS Ethernet IP: The default lP is 192.168.1.170 Port Number x 1: Fixed port: 9600 Client Quantity: Maximum support for two client connections (one TCP, one UDP) Communication Distance Height: 100 meters PLC Port (Connected to PLC): For Omron RS232 Interface Type: DB9 communication female port Transmission Rate: According to PLC settings Protocol Support: For Omron programming port protocol HMI Port (Connected to HMl): For Omron RS232 Interface Type: DB9 communication female port Transmission Rate: Default 9.6K, baud rate adaptive Protocol Support: For Omron programming port protocol Programming Software: CX Programmer Parameter Setting: Browser (recommended for Firefox) log in to the module IP, you can change the module IP (default 192.168.1.170), port number, webpage account number and password on the webpage Power Supply Mode: CP series PLC communication port (connected with communication cable) to take power directly, or 9-28VDC power terminal (anti reverse connection design) Working Environment: Temperature: 0℃ to 60℃, humidity: 90% non condensing Communication Stability: 24 hours of uninterrupted communication with PLC, 2 million 0 errors 1 x PLC to Ethernet Conversion Module 1 x Connection Cable