-40~110°C DIN Thermostat with Sensor High/Low Temperature 2 Alarm Relay NO NC COMMON Output 7A/250VAC AC90~260V Features: - Strong anti-interference ability, stable performance, simple circuit design, and high precision - Outer shell features a DIN rail mount for easy installation and sleek appearance - Includes adjustment and digital filtering functions - Standard dual relay output with contact capacity of 7A/250VAC Specifications: - Power supply: AC90~260V (operating voltage), power consumption less than 2W (other power supplies available on request) - Measurement accuracy: 0.5%FS - Measurement range: -40~110°C - Display: 0.36 inch high brightness red LED (other colors available on request) - Operating environment: -10~60°C (relative humidity below 80%) - Dimensions: 110 x 36 x 60 mm - Sensor length: 1.5m Package Included: 1 x DIN Rail Thermostat 1 x Sensor Code Table: TY1: Relay 1 output alarm type 0: Upper limit alarm – when temperature reaches AL1, relay closes; when temperature drops to (AL1-HY1), relay opens 1: Lower limit alarm – when temperature drops to AL1, relay closes; when temperature rises to (AL1+HY1), relay opens 2: Upper and lower limit alarm – when temperature reaches AL1, relay closes; when temperature reaches HY1, relay opens AL1: Relay 1 action value – adjustable from -40.0 to 130.0°C HY1: Relay 1 return difference – adjustable from 0.1 to 130.0°C TY2: Relay 2 output alarm type 0: Upper limit alarm – when temperature reaches AL2, relay closes; when temperature drops to (AL2-HY2), relay opens 1: Lower limit alarm – when temperature drops to AL2, relay closes; when temperature rises to (AL2+HY2), relay opens 2: Upper and lower limit alarm – when temperature reaches AL2, relay closes; when temperature reaches HY2, relay opens AL2: Relay 2 action value – adjustable from -40.0 to 130.0°C HY2: Relay 2 return difference – adjustable from 0.1 to 130.0°C SEC: Relay action delay time – 0 to 999 seconds When relay AL1 or AL2 reaches operating condition, it delays action by SEC seconds. If set to 0, no delay occurs LC: Temperature deviation correction value – adjustable from -20.0 to 20.0°C (Displayed value = Measured value + LC)