The Cleopatre transfer medium is a magical product valued by the MégaCréa team. It allows you to transfer an image onto various surfaces such as fabric, wood, or metal. By absorbing the colors of the image, it reproduces them on the surface once dry. The fibers of the paper can then be removed, leaving behind colors embedded in a transparent and stretchable film. It is even possible to use it on glass to mimic colored stained glass. This medium works with all types of paper, except photo paper, allowing you to print an image on a printer and transfer it to another surface. To use it, simply spread a thick layer on the image and the surface, press evenly, let it dry, moisten, and then remove the paper by rubbing. - Tools can be cleaned with soapy water. - Allow 60 minutes drying time between layers. - This transfer medium is solvent-free, acid-free, and formaldehyde-free. - With 100g of liquid medium, it is possible to transfer an image onto all types of surfaces. Just print the image in mirror, spread a thick layer on the image and the surface, press evenly, let it dry, moisten the paper, and remove it by rubbing. The medium can also be applied in three layers only on the image to transfer it onto a film, which can be adhered with the transfer medium. This magical product absorbs the colors of the paper as it dries, and once the fibers of the paper are removed, the colors are embedded in a transparent and stretchable film.