Mini OBD2 Wifi Scanner for Multi- CAN-BUS as same as Wifi.Top 5 Reasons To Get Mini OBD2 Wifi Scanner:1. Software Version: V2.1 (depending on software).2. Hardware Version: V1.5.3. Works with all OBD-II compliant vehicles.4. Wireless (Wifi).5. Support Four operating platforms (IOS, Android, Symbian, Windows)Compatible systems:Software support platform: Windows XP, Windows 7/8, IOS, Android, Symbian.Compatible software:Window: ScanMaster-, .net, PCMSCAN , etc.IOS: Auto Doctor, Mini OBDIIAndroid: Torque, DashCommand, OBD Car Doctor, Auto Doctor, Mini OBD, EOBD, etc.Symbian: OBDScopeSSID: WiFi_OBDIIIP: 192.168.0.10Port: 35000Communication: WIFIMaster Chip: STWorking Voltage: 9v ~ 16vWorking Current: 65mAStandby Current: 45mAOperating temperature: -40 ~ 85 Working Humidity: less than 60%Supported protocols:1.SAE J1850 PWM (41.6Kbaud)2.SAE J1850 VPW (10.4Kbaud)3.ISO9141-2 (5 baud init, 10.4 Kbaud)4.ISO14230-4 KWP (5 baud init, 10.4 Kbaud)5.ISO14230-4 KWP (fast init, 10.4 Kbaud)6.ISO15765-4 CAN (11bit ID, 500 Kbaud)7.ISO15765-4 CAN (29bit ID, 500 Kbaud)8.ISO15765-4 CAN (11bit ID, 250 Kbaud)9.ISO15765-4 CAN (29bit ID, 250 Kbaud)Mini OBD2 Wifi Scanner Functions:1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).2: Clear trouble codes and turn off the MIL ("Check Engine" light)3: Display current sensor data4: Engine RPM5: Calculated Load Value6: Coolant Temperature7: Fuel System Status8: Vehicle Speed9: Short Term Fuel Trim10: Long Term Fuel Trim11: Intake Manifold Pressure12: Timing Advance13: Intake Air Temperature14: Air Flow Rate15: Absolute Throttle Position16: Oxygen sensor voltages / associated short term fuel trims17: Fuel System status18: Fuel Pressure19: Many otherscolour:blackMaterial:Plastic + chipSize: 45mm * 25mm * 75mmPackage Contents:1 * Mini OBD2 Wifi Scanner1 * BoxOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.