With 1 temperature and humidity sensor Fully Intelligent Microcomputer Humidity Incubator Controller It can help you set up the appropriate temperature and humidity that the incubation needs according to the data Signal output number: 7, (against overheating, temperature control, humidity, temperature control, egg turning right left sufficiently, control, alarm) With four digital display screens to display temperature, humidity, number of days of egg rotation and incubation, it help you know all the incubation data immediately Main technical index: 1. Temperature display range: 0~40.5C 2. Temperature measurement accuracy: 0.1C 3. Humidity display range: 0~99%RH 4. Control release accuracy: 3%RH 5. Output lines: 6 lines (primary heating, auxiliary heating, exhaust (air exchange), turn left, turn right, moisten) 6. Output current: primary and auxiliary heating 30A, other output 10A 7. Egg rotation time: maximum 999 times 8. Egg rotation cycle: 0~999 minutes (default 90 minutes) 9. Egg rotation period: 0~999 seconds (180 seconds default) 10. Air exchange cycle: 0~999 minutes (120 minutes by default) 11. Air exchange period: 0~999 seconds (default 15 seconds) 12. Length of measuring line: about 1.5 meters Working conditions: 2. Relative humidity: less than 85% 3. Ambient temperature: -20~70 Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on Voltage: AC220V size: 29 x 8 x 12cm Material: plastic+metal colour: As shown Package Contents: 1 x XM-18D Incubator Controller Thermostat Hygrometer 1 x Temperature Sensor 1 x Humidity Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.