IIC precision clock module DS3231 with memory and sensor The DS3231 Is A Low-Cost, High-Precision I2c Real-Time Clock () With Integrated Temperature-Compensated Crystal Oscillator (Tcxo) And Crystal. The Device Contains A Battery Input To Maintain Timing When Mains Power Is Removed. Integrated Crystals Improve Device And Reduce Component Count In Production Lines. S3231 Is Available In Commercial And Industrial Temperature Ranges And Is Available In A 16-Pin 30omil So Package. The Stores Seconds, Minutes, Hours, Day Of The Week, Date, Month And Year Information. Months With Less Than 31 Days Will Have Of The Month Automatically Adjusted, Including Corrections For Leap Years. The Working Format Of The Clock Can Be 24-Hour Or 12-Hour Format With /Am/Pm Indication. Provides Two Programmable Calendar Alarms And A Programmable Square Wave Output. Address And Data Are Transmitted Serially Through The L2c Bidirectional Bus. A Temperature-Compensated Voltage Reference And Comparator Circuit Monitors Vcc Status, Detects Power Supply Failures, Provides A Reset Output, And Automatically Switches To Backup Power When Necessary. The Monitor Pin Can Be Used As A Manual Input To Generate An Mp Reset. In Addition To Its High Timing Accuracy, The Ds3231 Also Has Several Other Features That Expand The System Host'S Additional Capabilities And . The Device Integrates A Very Digital Temperature Sensor Which Can Be Accessed Via The I2c* Interface (As Well As The Time). The Accuracy Of This Temperature Sensor Is 3C. On-Chip Control Circuitry Enables Automatic Power Supply Detection And Manages Power Switching Between Primary Power And Backup Power (., Low-Voltage Battery). If The Main Power Supply Is Lost, The Device Continues To Provide Timing And Temperature With Unaffected Performance. An On-Chip Reset Function Can Be Used To Restart The System Microprocessor When The Main Power Supply Is Re-Applied Or The Voltage Value Returns To The Acceptable Range. 1. Other Iic DeVices Can Be Cascaded. The 24C32 Address Can Be Modified By Short-Circuiting A0/A1/A2. The Default Address Is 0X57 2. Battery Model Required:Cr2032 To That The Clock Will Still Run Normally After The System Is Powered Off. 3. Working Voltage:3.3-5.5V 4. Clock Chip:High-Precision Clock Chip DS3231 5. Clock Accuracy:Within The Range Of 0-40, Accuracy 2ppm, Annual Error Of About 1 Minute 6. With calendar alarm function 7. Programmable Square WaVe Output 8. The Real-Time Clock Generates Seconds, Minutes, Hours, Day Of The Week, Date, Month And Year, And ProVides Compensation Valid Until 2100. 9. The Chip Has Its Own Temperature Sensor With An Accuracy Of 3C. 10. Memory Chip:At24c32 (Storage Capacity 32k) 11. Bus Interface, High Transmission Speed 400khz (When The Working Voltage Is 5V) Wiring instructions (taking for R3 as an example): SCL-A5 SDA-A4 VCC-5V GND-GND Note:Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use Colour:As Shown Material:PCB Package Contents: 1 * DS3231 Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.