Side Brush Cover Kit Robovac 11s / 30c / 15c

Side Brush Cover Parts Kit For Robot Vacuum RoboVac 11S RoboVac 30C 30 15C product description Replacement parts compatible with RoboVac 11S / RoboVac 30 / RoboVac 30C / RoboVac 15C / RoboVac 12 / RoboVac 35C Includes 8 cleaning filters, 8 side brushes, 1 rolling brush Tips and tricks: 1. Please clean the filter frequently, and replace the brush every 2-3 months, the filter (depending on the frequency of use) to keep the vacuum cleaner working properly In high performance. 2. If the side brushes are bent due to transportation, just immerse them in warm water for a few minutes to recover. How to replace the filter: 1. Press the release button on the dust collector and pull it out. 2. Open the filter door and remove the old filter unit. 3. Install a new filter unit and close the filter door. (Make sure there is a black sponge filter at the bottom) 4. Insert it into the dust collector to lock it in place. How to replace the side brush: 1. Turn RoboVac over to the maintenance side brush. 2. Use both hands to remove the old side brush. 3. Pull the hair hard to remove it. 4. Press the new side brush to snap it into place. How to replace the roller brush: 1. Press the release tab to remove the shield. 2. Hold the old roller brush firmly and lift up and take it out. 3. Align the end lugs of the new rolling brush and the slot correctly for installation. 4. Replace the brush cover and press it into place. The packaging includes: 8 X high performance filter; 10 X side brush 1 x roller brush